tablet планшет флешка usb 3d printer клавиатура коврик для мыши laptop makeboot ultimaker Newest 3d printer impresora 3d reprap prusa i3 3d printer kit impressora 3d imprimante delta 3d printer prusa i4 stampante 3d 3d-printer kossel 3d drucker metal mini wanhao cheap 3d printers 3d wax printer anet a6 infitary stampante garlic card 3d printer dual extruder sla 3d printer Anet A6 A8 xl 3d printer color TVCO X1 X3 anet a8 3d printer rostock 3d printer 2016 delta kits ZONESTAR P802M P802N Micro SD card makebase V1.1 Ramps 1.4 motherboard ATMEGA2560 Arduino
2017 Newest Upgrade
New Arrial Dual Extruder Mixed Color
Full Metal Frame 3D Printer Kit.
Dual Mixed 20M: Dual Extruder Mixed Color(2-in-1-out hotend) 2 extruder motor, with 20M filament,
Dual Mixed 2 rolls: Dual Extruder Mixed Color(2-in-1-out hotend), 2 extruder motor, with 2 rolls 0.25KG filament,
1. Bed auto level sensor(click to purchase): Automatic detect of levelness of heat bed.
2. Filament run out detector(click to purchase): Automatic detect filament run out and prompt to replace.
3. Laser engraver kit(click to purchase): Add this part, this printer can be use to mark on the wood, plastic and cut paper, foam, thin wood board, etc.
NOTE: We have updated the control board from V3.x to the newest version V5.x.
!!!!!Free Tax !!!!!
If you are from the below countries, and choose the below shipping method, we will clear the customs for you.
NOTE: Parts and components for DIY , need assemble by yourself !
Q: Does this product has heat bed?
A: Yes, almost all of our products have a heat bed, except for D806(D806B has heat bed), D807, and D810(D810B has heat bed). The power of the hot bed depends on the size of hotbed, for example, 65W for D806B and 140W for P802.
Q: Can I choose filament? Can I choose filament color?
A: If you choose shipping from our oversea warehouse, the filament is PLA and color is Random, if you choose shipping from China, we will try our best to meet your requirements. But if we don’t have these color filaments in our stock, we will contact you and ask you to extend ORDER PERPARE TIME or change to another color. Please pay attention to our message in Aliexpress.
Q: How about the power cord standard?
A: We will ship the appropriate power cord according to the country of accept address. But If you choose shipping from Germany warehouse or Russian warehouse, the power cord is EU standard. If you choose shipping from USA warehouse, the power cord is America standard. If you have any special requests, please leave us a message when you place an order.
Q: What is the filament run out detector? Can I add a filament run out detection module for dual extruder printer?
A: Usually you can only see this function in the machines that the value is more than $1000. Often we don’t know whether the rest of filament in the roll is enough to finish printed a model or not. Connected this module to your printer, the printer will pause printing automatically when the filament roll is run out, then you can use a new filament to continue printing, that will save a lot of time and money for you. Dual extruder can also use this module, but you need to buy 2 pcs and connect the module to X+ and Y+ connector on the control board.
Q: Can I use the laser kit to my 3d printer?
A: The laser kit can be used for the following models: P802 serial(P802N/P802C/P802MII/P802S) /D80X serial(D805/D806/D808).
Q: Which product has dual extruder?
A: We named the dual extruder product as xxxxR2, for example, P802NR2, P802MR2, P802QR2, D805R2,D808R2, D808XR2, etc. are dual extruder product.
Q: What is the warranty rule of your products? If my product is damaged after the warranty period, how to deal with it?
A: As a DIY product, our product warranty is slightly different from the general products, the specific rules are as follows:
Electronic accessories and parts:
If there is a problem with the product within 7 days upon received, and you can provide us some relevant evidences(pictures or videos) for confirmation, we will send you the replacement without any charge. If there is a problem with the product within 8-45 days upon received, and you can provide us some relevant evidences(pictures or videos) for confirmation, we can send you the replacement and you only need to pay for the shipping cost. If there is a problem with the product within 46-365 days upon received, we can provide you with necessary accessories/parts at cost price. Or, you could return the malfunction part(s) to us for free repair. However, you will be responsible for the shipping costs of both way.
Mechanical accessories and parts:
If there is a problem with the product within 7 days upon receive, and you can provide us some relevant evidences(pictures or videos) for confirmation, we will send you the replacement without any charge. If there is a problem with the product within 7-90 days upon receive, and you can provide us some relevant evidences(pictures or videos) for confirmation, we can send you the replacement and you only need to pay for the shipping cost. If there is a problem with the product within 91- 365 days upon receive, we can provide you with necessary accessories/parts at cost price.
Please notice that the following parts are not in the scope of warranty services: Gift, Packaging, Hotend, Nozzle, SD card, Filament, Wire, screws.
If your printer is out of the warranty period, please contact us before purchase, we will provide you with preferential prices.
Q: How to purchase multiple products in one order? How to reduce freight cost when I buy the machine and accessories at the same time?
A: Please refer to the below steps:
1. Add all of the products you want to “Shopping Cart”, then click the “Buy All” button in the shopping cart.
2. Once you have confirmed that all the products you want in the shopping cart, click “Confirm & pay” to confirm the order ( If you didn’t confirm, we can’t see your order and reset the price for you).
3. If all of the products are the same shipping mode (e.g. “Aliexpress standard shipping”), the system will calculate the weight and combine freight automatically, you can finish payment directly.
4. If there are different shipping mode, please leave message in the aliexpress to us, we will reset the price for you ASAP.
5. Finish payment.
Q: Do I have to pay duty for the products? How much do I have to pay?
A: Free shipping don’t include DUTY. Different countries have different rules on tariffs. Because some of the country’s tax threshold is higher than product value, so you don’t need to pay the duty. E.g. USA, Australia, Korea, etc. If you are from EU and choose shipping from Germany warehouse, you don’t need to pay the import duty. If you are from Russia, we have cleared the customs too. If you have any question about this, please contact with us before purchase.
NOTE 1: Import duty is usually charged by courier.
NOTE 2: Any customs tax are the buyer’s responsibility, If you have any doubts about customs, please seek advice from your local customs office. We will choose the suitable declare name (3d printer parts or 3D printer filament according to your purchase) and amount for you ,so as to clean the customs successfully. If you have any special requisition, please leave message when you place an order and we will try our best to meet your requirement. But if there are any issue because of the declare value or declare name, you have to deal with custom clearance yourself. Any question, please feel free to contact with us.
Q: The parcel has arrived and the courier ask me to pay the the tariff, what’s happened if I don’t pay it and get the parcel.
A: First you will can’t get the parcel, and because in some country the customs will return the parcel, the returned shipping cost maybe is 2~3 times of the product value.If that were happen, we will charge the balance from you. So please be clear about the customs regulations before you purchase!!
Q: I use Linux( or Mac.) OS, can I print from computer?
A: Yes, many of HOST and slicing softwares can support Linux and Mac. OS, e.g. Cura, repetier-Host, etc. you can use these software in your PC or Laptop.
Q: Can I print from SD card(does the printer support off-line printing)?
A: Yes, the print can support print from SD card, you can slicing the model and store gcode file to SD card and then start to print from SD card.
Q: Do you provide the HOST and slicing software？
A: There are a lot of good free software on the internet, we will provide you with the download link.
Q: I’m a student and I worried about whether the product is easy to assmble, what document do you provide?
A: We provide some very detailed documentations for installation, using and commissioning of the course and video, if you are interested, you can scan the QR code to watch these videos. Don’t worry about how to assemble, in our YouTube channel, you can see how the children who are only 12 years old can complete it.
Q: What should I do after I receive the product? If the box is damaged, what should I do?
A: The parcel have passed strict inspection before they leave the factory. When you receive the package, if the box is good, please sign, and we suggest that you take a video when you open the box, so that once you find the parts are lost or damaged, you can ask us to resend the missed or damaged parts. If the box is damaged, please take some photos and ask the courier to complain to get the Claim number. We will provide these photo to our courier to claim and then refund you or send the damaged parts to you for free.
Q: I have received the parcel but missed some parts, what should I do?
A: Although we have checked the products before it left the factory, but because the package may be reopen for inspection in the course of transportation, some parts may still be lost. If you can provide the unboxing video, we will send the missed parts to you ASAP for free. If you haven’t, please contact with us, we will try our best to give you a satisfactory solution.
Q: How long will it take me to get the goods after I order?
A: Delivery time depends on the shipping mode and the receiving address, Customs clearance, safety checks and weather also affect delivery time. The following is a statistical form of delivery time for your reference:
Q: Why your salesmen tell me my receiving address is in the remote area of the logistics company? What shall I do?
A: First of all logistics companies will has delivery remote areas, and different logistics companies has different remote areas. They will charge $40 to $50 remote fee for every shipping order. Secondly, only after you place the order we know whether your address belongs to the remote areas of the logistics company, so our salesman contact you after you placed an order and ask you to pay the cost of remote fee, or ask you to change to another shipping mode that do not need to charge the remote fee (but the freight may increase).
|Positive (0%)|| 5 Stars (0)|
| 4 Stars (0)|
| 3 Stars (0)|
|Neutral (0%)|| 2 Stars (0)|
| 1 Star (0)|
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller. |
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|